Construction of a uniform zeolitic imidazole framework (ZIF-8) nanocrystal through a wet chemical route towards supercapacitor application.

Exploring larger surface area electrode materials is crucial for the development of an efficient supercapacitors (SCs) with superior electrochemical performance. Herein, a cost-effective strategy was adopted to synthesize a series of ZIF8 nanocrystals, and their size effect as a function of surface area was also examined. The resultant ZIF8-4 nanocrystal exhibits a uniform hexagonal structure with a large surface area (2800 m2 g-1) and nanometre size while maintaining a yield as high as 78%. The SCs performance was explored by employing different aqueous electrolytes (0.5 M H2SO4 and 1 M KOH) in a three-electrode set-up. The SC performance using a basic electrolyte (1 M KOH) was superior owing to the high ionic mobility of K+. The optimized ZIF8-4 nanocrystal electrode showed a faradaic reaction with a highest capacitance of 1420 F g-1 at 1 A g-1 of current density compared to other as-prepared electrodes in the three-electrode assembly. In addition, the resultant ZIF8-4 was embedded into a symmetric supercapacitor (SSC), and the device offered 350 F g-1 of capacitance with a maximum energy and power density of 43.7 W h kg-1 and 900 W kg-1 at 1 A g-1 of current density, respectively. To determine the practical viewpoint and real-world applications of the ZIF8-4 SSC device, 7000 GCD cycles were performed at 10 A g-1 of current density. Significantly, the device exhibited a cycling stability around 90% compared to the initial capacitance. Therefore, these findings provide a pathway for constructing large surface area ZIF8-based electrodes for high-value-added energy storage applications, particularly supercapacitors.

Fabrication of Ru loaded MgB2 with guar gum hybrid for photocatalytic degradation of crystal violet.

Today, dyes/pigment-based materials are confronting a serious issue in harming marine ecology. Annihilate these serious water pollutants using photoactive 2D nanohybrid catalysts showed promising comparativeness over available photocatalysts. In the present work, a facile route to decorate Ruthenium (Ru) on 2D MgB2 flower-like nanostructures was developed via ecofriendly guar gum biopolymer substantial template (MgB2/GG@Ru NFS) and its photocatalytic performance was reported. Synthesis of MgB2@Ru, MgB2/GG@Ru NFS and commercial MgB2, was studied by FTIR, XRD, FE-SEM, EDX, AFM, TEM, UV-vis spectra, and XPS analysis. From the results, the MgB2/GG@Ru NFS exhibited a superior photocatalytic performance (99.7 %) than its precursors MgB2@Ru (79.7 %), and MgB2 (53.7 %), with the degradation efficiency of the crystal violet (CV) within 100 min under visible light irradiation. The proposed photo-catalyst MgB2/GG@Ru NFS showed negligible loss of photocatalytic activity even after five successive cycles, revealing its reusability and enhanced stability due to the network structure. The photocatalytic mechanism for MgB2/GG@Ru NFS was evaluated by trapping experiment of active species, verifying that superoxide (O2-) and electron (e-) contributed significant role in the dye degradation.

Tunning the Zeolitic Imidazole Framework (ZIF8) through the Wet Chemical Route for the Hydrogen Evolution Reaction.

Utilizing zeolitic imidazolate frameworks (ZIFs) poses a significant challenge that demands a facile synthesis method to produce uniform and nanometer-scale materials with high surface areas while achieving high yields. Herein, we demonstrate a facile and cost-effective strategy to systematically produce ZIF8 nanocrystals. Typically, ZIF8 nanocrystal synthesis involves a wet chemical route. As the reaction time decreased (150, 120, and 90 min), the size of the ZIF8 crystals decreased with uniform morphology, and productivity reached as high as 89%. The composition of the product was confirmed through XRD, FE-SEM, TEM, EDS, and Raman spectroscopy. The ZIF8 synthesized with different reaction time was finally employed for catalyzing the electrochemical hydrogen evaluation reaction (HER). The optimized ZIF8-3 obtained at 90 min of reaction time exhibited a superior catalytic action on the HER in alkaline medium, along with a remarkably long-term stability for 24 h compared with the other ZIF8 nanocrystals obtained at different reaction times. Specifically, the optimized ZIF8-3 sample revealed an HER overpotential of 172 mV and a Tafel slope of 104.15 mV·dec-1. This finding, thus, demonstrates ZIF8 as a promising electrocatalyst for the production of high-value-added green and sustainable hydrogen energy.

Titanium dioxide incorporated in cellulose nanofibers with enhanced UV blocking performance by eliminating ROS generation.

The preparation of sunblocks with dispersion stability, ultraviolet blocking, and photocompatibility remains a considerable challenge. Plant-derived natural polymers, such as cellulose nanofibers (CNF), show versatile traits, including long aspect ratio, hydrophilic nature, resource abundance, and low material cost. In the present study, a facile and cost-effective strategy is reported for the fabrication of nanostructured inorganic materials by incorporating natural polymers as interspersed, systematically nanosized titanium dioxide (TiO2) particles onto CNF. Among all experiments, the optimized TiO2@CNF3 showed higher ultraviolet blocking performance and less whitening effect. The outstanding performance is attributed to the engineering of equally dispersed nano-sized TiO2 particles on the CNF surface and stable dispersion. Significantly, TiO2@CNF3 exhibited excellent compatibility with avobenzone (80%), an oil-soluble ingredient used in sunblock products, illustrating the photoprotection enhancement under ultraviolet A (UVA) and ultraviolet B (UVB). Moreover, only 14.8% rhodamine B (Rho-B) dye degraded through photocatalytic oxidation process with the TiO2@CNF3, which is negligible photocatalytic activity compared to that of TiO2 (95% dye degraded). Furthermore, commercial inorganic and organic sunblock products with SPF lifetimes of 35+ and 50+ were modified using CNF, significantly enhancing the transmittance performance compared to that of the pure sunblock. However, it was also observed that hydrophilic CNF tended to demulsify the creams due to electrostatic disequilibrium. This CNF-based modified TiO2 system is a new window to replace effective sunblock products in high-value-added applications, such as cosmetics.

Fabrication of Fe3O4-incorporated MnO2 nanoflowers as electrodes for enhanced asymmetric supercapacitor performance.

Manganese dioxide (MnO2) is considered a promising aspirant for energy storage materials on account of its higher theoretical capacitance along with low capital cost. However, its performance is generally limited by its poor lifespan and intrinsic conductivity. In this study, MnO2-incorporated iron oxide (Fe3O4) nanoflowers were synthesized through a facile hydrothermal route and their electrochemical performance was probed. The surface composition and morphology of the as-synthesized samples were confirmed using X-ray diffraction, X-ray photoemission spectroscopy, and field emission scanning microscopy. The nanoflower-like structure and synergistic effect between the two oxides of the as-prepared MnO2@Fe3O4 nanocomposite electrode result in desirable surface area and intrinsic conductivity. Owing to its higher surface area and electrical conductivity, the MnO2@Fe3O4 nanoflower-like nanocomposite exhibits an enhanced specific capacitance (Cs) of 1651 F g-1 (1 A g-1) in a three-electrode test cell, which is two-fold higher than those of pristine Fe3O4 and MnO2. In addition, an asymmetric supercapacitor (ASC) was readily constructed by sandwiching a cellulose membrane (separator) between MnO2@Fe3O4 (cathode) and activated carbon (anode). Significantly, the ASC displayed a high Cs of 131 F g-1 (1 A g-1) along with a pretty high cycling stability of 96% over 5000 cycles at 15 A g-1 and a high energy density of 46.6 Wh kg-1 at 0.8 kW kg-1. These results demonstrate the significant potential of the MnO2@Fe3O4 nanoflower ASC device for state-of-the-art futuristic advanced energy storage applications.

Correction: Fabrication of Fe3O4-incorporated MnO2 nanoflowers as electrodes for enhanced asymmetric supercapacitor performance.

Correction for 'Fabrication of Fe3O4-incorporated MnO2 nanoflowers as electrodes for enhanced asymmetric supercapacitor performance' by Iqra Rabani et al., Dalton Trans., 2022, https://doi.org/10.1039/D2DT01942F.

Enhanced photocatalytic crystal-violet degradation performances of sonochemically-synthesized AC-CeO2 nanocomposites.

Semiconductor-based photocatalysis is one of the favorable techniques for the wastewater treatment. Herein, we synthesized the activated carbon-decorated cerium dioxide (AC-CeO2) nanocomposites via the facile ultrasonication method by using the biomass-derived AC nanoflakes and the sonochemically-synthesized CeO2 nanoparticles. The AC-CeO2 nanocomposites exhibited the aggregated morphology with the AC nanoflakes-anchored CeO2 nanoparticles. Since the hybridization of conductive AC and semiconductive CeO2 would lead to the increased photocarrier transport and the reduced photocarrier recombination, during the photocatalytic reaction, the AC-CeO2 nanocomposites showed the enhanced crystal violet dye-degradation efficiency up to 97.9 % within 135 min. The results suggest that the AC-CeO2 nanocomposites hold promise as a prominent photocatalyst for future green environmental technology.

A Facile Design of Solution-Phase Based VS2 Multifunctional Electrode for Green Energy Harvesting and Storage.

This work reports the fabrication of vanadium sulfide (VS2) microflower via one-step solvo-/hydro-thermal process. The impact of ethylene glycol on the VS2 morphology and crystal structure as well as the ensuing influences on electrocatalytic hydrogen evolution reaction (HER) and supercapacitor performance are explored and compared with those of the VS2 obtained from the standard pure-aqueous and pure-ethylene glycol solvents. The optimized VS2 obtained from the ethylene glycol and water mixed solvents exhibits a highly ordered unique assembly of petals resulting a highly open microflower structure. The electrode based on the optimized VS2 and exhibits a promising HER electrocatalysis in 0.5 M H2SO4 and 1 M KOH electrolytes, attaining a low overpotential of 161 and 197 mV, respectively, at 10 mA.cm-2 with a small Tafel slope 83 and 139 mVdec-1. In addition, the optimized VS2 based electrode exhibits an excellent electrochemical durability over 13 h. Furthermore, the superior VS2 electrode based symmetric supercapacitor delivers a specific capacitance of 139 Fg-1 at a discharging current density of 0.7 Ag-1 and exhibits an enhanced energy density of 15.63 Whkg-1 at a power density 0.304 kWkg-1. Notably, the device exhibits the capacity retention of 86.8% after 7000 charge/discharge cycles, demonstrating a high stability of the VS2 electrode.

Sonochemically exfoliated polymer-carbon nanotube interface for high performance supercapacitors.

Energy storage characteristics of organic molecules continue to attract attention for supercapacitor applications, as they offer simple processing and can be employed for flexible devices. The current study utilized the ultrasonically driven exfoliation to obtain poly diketo pyrrolopyrrole-thieno thiophene (PDPT) and multiwalled carbon nanotube (CNT) composite, subsequently fabricated a PDPT donor-π-acceptor heterojunction with CNT and investigated energy storage applications. The composite was characterized using series of standard analytical techniques. Morphology indicated well alighted CNT tubes on PDPT polymer nanosheets with an effective interface, providing efficient electrochemical regions, enabling fast charge transfer between PDPT and CNT. We also investigated the PDPT-CNT composite electrochemical behavior, achieving 319.2 and 105.7F.g-1 capacitances for PDPT-CNT and PDPT at 0.5 A.g-1 current density for three electrode configurations; and 126 and 42F.g-1 for symmetric structures, respectively. Experimental results confirmed that PDPT-CNT composite electrodes achieved two fold the capacitance compared with PDPT alone. The hypothesis and synthetic approach provide an excellent candidate for conjugated polymers with carbon nanotubes and energy related devices.

Graphitic carbon-encapsulated V2O5 nanocomposites as a superb photocatalyst for crystal violet degradation.

To materialize the excellent photocatalyst for crystal violet dye-degradation, the graphitic carbon-encapsulated vanadium pentoxide (GC-V2O5) nanocomposites were synthesized through the simple sonication method by using the green tea waste-derived GC nanoflakes and the sonochemically synthesized V2O5 nanorods. The nanocomposites were confirmed to comprise an aggregated morphology, in which the orthorhombic V2O5 nanorods were well anchored with the intertwingled GC nanoflakes. Owing to the encapsulation of defective V2O5 by conductive GC, the GC-V2O5 nanocomposites exhibited the enhanced photocatalytic dye-degradation efficiency up to 98.4% within 105 min. Namely, the encapsulated GC nanosheets might compensate the native defects (i.e., charge traps) on the V2O5 surface; hence, the charge transport could be enhanced during the dye-degradation process while the photocarrier recombination could be suppressed. The results suggest the conducting layer-encapsulated semiconducting oxide nanocomposites (e.g., GC-V2O5) to be of good use for future green environmental technology, particularly, as a superb photocatalyst for dye degradation.

Visible light-driven photocatalytic rapid degradation of organic contaminants engaging manganese dioxide-incorporated iron oxide three dimensional nanoflowers.

Water pollution via hazardous organic pollutants poses a high threat to the environment and globally imperils aquatic life and human health. Therefore, the elimination of toxic organic waste from water sources is vital to ensure a healthy green environment. In the current work, we synthesized α-MnO2-Fe3O4 3D-flower like structure using a two-step hydrothermal method and explored the combination in a visible-light-assisted photocatalytic degrdation of dyes. The attained high specific surface area of 82 m2/g with mesoporous nature of α-MnO2 and Fe3O4 together can generate more active sites after exposure to visible light, leading to remarkable photodegradation performance. Significantly, twofold higher dye (methylene blue, MB (94.8%/120 min; crystal violet, CV (93.7%/120 min)) and drug (LVO 91%/90 min) photodegradations were observed with α-MnO2-Fe3O4 as catalyst than pure α-MnO2 and Fe3O4 at pH 6, respectively. This is attributed to the higher surface area and synergistic effect between Mn and Fe. More than 85% stability was observed with optimized catalysts employing MB and CV dyes, demonstrating the excellent reusability of the α-MnO2-Fe3O4. The underlying mechanism indicates that the formation of reactive oxygen species predominantly plays a role in the photodegradation of dyes under visible light. Consequently, these new insights will shed light on the practical applications of the α-MnO2-Fe3O4 3D-flower-like spherical structure for eco-friendly remediation via wastewater treatment.

Stretchable and Self-Healable Poly(styrene-co-acrylonitrile) Elastomer with Metal-Ligand Coordination Complexes.

Recently, soft electronics have attracted significant attention for various applications such as flexible devices, artificial electronic skins, and wearable devices. For practical applications, the key requirements are an appropriate electrical conductivity and excellent elastic properties. Herein, using the cyano-silver complexes resulting from coordination bonds between the nitrile group of poly(styrene-co-acrylonitrile) (SAN) and Ag ions, a self-healing elastomer demonstrating electrical conductivity is obtained. Because of these coordination complexes, the Ag-SAN elastomer possesses elasticity, compared with pristine SAN. The fracture strain of the Ag-SAN elastomers increased with the amount of added Ag ions, reaching up to 1000%. Additionally, owing to the presence of reversible coordination bonds, the elastomer exhibits self-healing properties at room temperature and electrical conductivity, thereby improving the possibility of its utilization in novel applications wherein elastic materials are generally exposed to external stimuli.

Suppressed photocatalytic activity of ZnO based Core@Shell and RCore@Shell nanostructure incorporated in the cellulose nanofiber.

The protection of skin cells against intense ultra-violet (UV) rays is of greater concern and needs immediate attention. Sustainable efforts and strategies are in progress to minimize the factors that adversely affect skin cells. Herein, we synthesized zinc oxide (ZnO) in the form of core-shell (Core@Shell) or reverse core-shell (RCore@Shell) structure where silica was synthesized as a shell or core, respectively on the surface of cellulose nanofiber (CNF). Both cases exhibited much higher UV-blocking performance as well as alleviate the whitening effect because these particles retain their nanoscale dimensions as favored by the cosmetic industry. Significantly, these nanostructures shows the less photocatalysis activity than that of pristine ZnO nanoparticles. And we found that the photocatalytic activity of ZnO in RCore@Shell/CNF was more suppressed that Core@Shell/CNF, showing that it is a proper structure to neutralize or scavenge free radicals prior to their exit from the particles. Our results suggest that, reduction in photocatalysis induced by Core@Shell/CNF and RCore@Shell/CNF nanostructures is a promising strategy for skincare products in cosmetic industry.

ZIF-8 templated assembly of La3+-anchored ZnO distorted nano-hexagons as an efficient active photocatalyst for the detoxification of rhodamine B in water.

The use of lanthanum-anchored zinc oxide distorted hexagon (La@ZnO DH) nanoclusters as an active material for the photodegradation of rhodamine B (Rh-B) dye via hydrogen bonding, electrostatic, and π-π interactions is examined herein. The active photocatalyst is derived from porous zeolite imidazole frameworks (ZIF-8) via a combined ultrasonication and calcination process. The distorted hexagon nanocluster morphology with controlled surface area is shown to provide excellent catalytic activity, chemical stability and demarcated pore volume. In addition, the low bandgap (3.57 eV) of La@ZnO DH is shown to expand the degradation of Rh-B under irradiation of UV light as compared to the pristine ZIF-8-derived ZnO photocatalyst due to inhibited recombination of electrons and holes. The outstanding physicochemical stability and enhanced performance of La@ZnO DH could be ascribed to the synergistic interaction among La3+ particles and the ZnO nanoclusters and provide a route for their utilization as a promising catalyst for the detoxification of Rh-B.

Highly dispersive Co3O4 nanoparticles incorporated into a cellulose nanofiber for a high-performance flexible supercapacitor.

Transition metal oxides used as electrode materials for flexible supercapacitors have attracted huge attention due to their high specific capacitance and surface-to-volume ratio, specifically for cobalt oxide (Co3O4) nanoparticles. However, the low intrinsic electronic conductivity and aggregation of Co3O4 nanoparticles restrict their electrochemical performance and prevent these electrode materials from being commercialized. Herein, a facile, advantageous, and cost effective sol-gel synthetic route for growing Co3O4 nanoparticles uniformly over a low cost and eco-friendly one-dimensional (1D) hydrophilic cellulose nanofiber (CNF) surface has been reported. This exhibits high conductivity, which enables the symmetric electrode to deliver a high specific capacitance of ∼214 F g-1 at 1 A g-1 with remarkable cycling behavior (∼94% even after 5000 cycles) compared to that of pristine CNF and Co3O4 electrodes in an aqueous electrolyte. Furthermore, the binder-free nature of 1D Co3O4@CNF (which was carbonized at 200 °C for about 20 min under a H2/Ar atmosphere) shows great potential as a hybrid flexible paper-like electrode and provides a high specific capacitance of 80 F g-1 at 1 A g-1 with a superior energy density of 10 W h kg-1 in the gel electrolyte. This study provides a novel pathway, using a hydrophilic 1D CNF, for realizing the full potential of Co3O4 nanoparticles as advanced electrode materials for next generation flexible electronic devices.

A facile mechanochemical preparation of Co3O4@g-C3N4 for application in supercapacitors and degradation of pollutants in water.

Our study is aimed at synthesizing cobalt oxide (Co3O4) with graphite carbon nitride (g-C3N4) to form a Co3O4@g-C3N4 hybrid through a green mechanochemical one-pot synthetic approach for manufacturing efficient supercapacitor electrodes and photocatalysts. In the present study, the Co3O4@g-C3N4 hybrid revealed a significantly higher specific capacitance (Cs) (of ~ 457.2 Fg-1 at a current density of 1 Ag-1) than that of the pristine Co3O4, which proved its pseudocapacitive behavior, with a couple of redox peaks observed in three electrode measurements (obtained by using a 3.0-M KOH aqueous electrolyte). The optimized Co3O4@g-C3N4 hybrid was further embedded for a symmetric supercapacitor performance, delivering an excellent Cs of ~ 92 Fg-1 at a current density of 1 Ag-1; this was supplemented with a remarkable cycling stability (~ 92% over 5000 cycles). The Co3O4@g-C3N4 hybrid was further examined for photocatalysis activity using a rhodamine B (RhB) dye, and more than 95% RhB dye was degraded through the photocatalytic reduction process (after 60 min of UV irradiation). This Co3O4@g-C3N4 hybrid catalyst exhibited excellent reusability and stability and appears to be a highly efficient, cost-effective, eco-friendly, and reusable catalyst; the g-C3N4 present with the Co3O4 acted as a conductive nano-network, leading to a higher capacitive and photocatalytic performance.

Relationship between disability self-awareness and cognitive and daily living function in schizophrenia.

We investigated the relationship between disability self-awareness and cognitive and daily living functions in 49 patients with schizophrenia. The World Health Organization Disability Assessment Schedule 2.0 (WHODAS) self-report was used to identify patient-rated global function. A clinician-rated measure of global function was obtained using the Personal and Social Performance Scale (PSP); disability self-awareness was calculated using two global function scores. The Positive and Negative Syndrome Scale (PANSS) and the Calgary Depression Scale for Schizophrenia (CDSS) were used to evaluate clinical symptoms, while the MATRICS consensus cognitive battery (MCCB) and the UCSD Performance-based Skills Assessment (UPSA) were applied to assess cognitive and daily living functionality, respectively. The WHODAS scores correlated significantly with the MCCB verbal learning, visual learning, and social cognition domains, and with the UPSA communication domain. The PSP correlated significantly with all MCCB and UPSA domains. Disability self-awareness demonstrated positive correlation with most domains of MCCB and UPSA. The findings of this study indicate that the lower the cognitive and daily living function in patients with schizophrenia, the more positively they perceive their own disability.

1D-CoSe2 nanoarray: a designed structure for efficient hydrogen evolution and symmetric supercapacitor characteristics.

Direct growth of self-supported one-dimensional (1D) nanorod arrays on conducting substrates is highly attractive for electrocatalysis, due to their unique shape, size, and length. In this work, a facile and simple two-step method was employed to synthesize 1D-CoSe2 nanoarrays on titanium (Ti) foil via a wet chemical ion-exchange approach. The as-synthesized 1D-CoSe2 nanoarrays were directly used as electrode materials for hydrogen evolution reaction and supercapacitors. As an electrocatalyst, the optimized 1D-CoSe2(tex-48 h) nanoarray exhibits excellent hydrogen evolution properties with a small Tafel slope of 78 mV dec-1, low overpotentials of 41 mV@1 mA cm-2 and 216 mV@10 mA cm-2, and extended robust performance for 25 h. Moreover, for a symmetric device, it delivers a maximum specific capacitance of 152 F g-1 at 0.5 A g-1 and a better energy density of 21.1 W h kg-1 at a power density of 0.5 kW kg-1. Also, the symmetric device capacity retention behavior achieves ∼96.8% of the initial result after 5000 cycles, revealing the good stability of the electrode. Our findings offer a new way to further the development of high-performance energy devices.

One-Pot Synthesis of W2C/WS2 Hybrid Nanostructures for Improved Hydrogen Evolution Reactions and Supercapacitors.

Tungsten sulfide (WS2) and tungsten carbide (W2C) are materialized as the auspicious candidates for various electrochemical applications, owing to their plentiful active edge sites and better conductivity. In this work, the integration of W2C and WS2 was performed by using a simple chemical reaction to form W2C/WS2 hybrid as a proficient electrode for hydrogen evolution and supercapacitors. For the first time, a W2C/WS2 hybrid was engaged as a supercapacitor electrode and explored an incredible specific capacitance of ~1018 F g-1 at 1 A g-1 with the outstanding robustness. Furthermore, the constructed symmetric supercapacitor using W2C/WS2 possessed an energy density of 45.5 Wh kg-1 at 0.5 kW kg-1 power density. For hydrogen evolution, the W2C/WS2 hybrid produced the low overpotentials of 133 and 105 mV at 10 mA cm-2 with the small Tafel slopes of 70 and 84 mV dec-1 in acidic and alkaline media, respectively, proving their outstanding interfaced electrocatalytic characteristics. The engineered W2C/WS2-based electrode offered the high-performance for electrochemical energy applications.

Effects of an extrinsic motivator on the evaluation of cognitive and daily living functions in patients with schizophrenia.

We investigated the effect of an extrinsic motivator on the MATRICS Consensus Cognitive Battery (MCCB) and UCSD Performance-Based Skills Assessment (UPSA) scores, which assess cognitive and daily living functions, in patients with schizophrenia. We enrolled 60 clinically stable patients with schizophrenia and allocated them to the motivator or control group. We conducted baseline assessments of cognitive function using the MCCB, daily living function using the UPSA, clinical symptoms, and psychosocial characteristics in both groups. In the retrial, we initially evaluated clinical symptoms. Next, we assigned an extrinsic motivator to the motivator group and again assessed cognitive function and daily living function using the MCCB and UPSA. Statistical analyses were performed using t-tests, Chi-square tests, Fisher's exact test, repeated measures analysis of variance, and logistic regression analysis. We found significant time × group interactions in processing speed, verbal learning, visual learning, and composite scores of MCCB. There were no significant interactions in UPSA scores. The meaningful change rates of social cognition and composite scores in MCCB were significantly higher in the motivator group than in the control group. After adjusting for additional variables, the extrinsic motivator had a significant effect on the meaningful MCCB composite score change. Conclusively, our findings suggest beneficial effects of extrinsic motivator on the MCCB score in patients with schizophrenia. In the future, the implementation and interpretation of the MCCB considering the motivation is necessary.